Here is how you can modify the default IP address range that is assigned to the second NIC when the Internet Connection Sharing is enabled on the LAN card that is connected to the direct Internet line: Log on to the computer with the administrator account. After logging on, press the Windows + R keys simultaneously to initialize the Run command Under Edit IP settings, choose Manual, then turn on IPv4. To specify an IP address, in the IP address, Subnet prefix length, and Gateway boxes, type the IP address settings. To specify a DNS server address, in the Preferred DNS and Alternate DNS boxes, type the addresses of the primary and secondary DNS servers. To specify IPv6 settings manually. If Windows hotspot is still not asssigning IP, you can proceed to the methods below to fix the problem. 1. Start the WLAN AutoConfig service. Click on the Search Icon on your taskbar, type Services in the search box, and select the Best match result. Scroll down to locate WLAN AutoConfig, right-click and select Properties. Posted on Jan 2, 2023 4:51 PM. Greetings mrsnoble, You’d find the IP address a connected device is using, when connected to the hotspot, on that device. For example - if another iPhone is paired to your iPhone’s hotspot you can check for the IP address on the connected iPhone in Settings > Wi-Fi by tapping the ‘i’ next to the network name. Configure hotspot settings. 1. From the Mobile Hotspot screen, select the desired network setting: • HOTSPOT NAME: Change the Name of the Mobile Hotspot network. • SECURITY: Change the Security type of the Mobile Hotspot network. • HOTSPOT PASSWORD: View or change the Password of the Mobile Hotspot network. 2. Looks like it gives out a public IP. The IP address doesn't really matter though. I don't really know, but it probably just routes the 2nd IP through your phone's IP. So the computer is just the next hop after the phone. Access the Admin Web Interface. From the Network tab, click. LAN. . From the IPv4 section, enter the desired information into the following fields then click. Save. (located in the lower-left). The information depicted in the following image are the default settings. IP Address. Enabling the HotSpot feature on your printer turns your printer into a Wi-Fi HotSpot that offers secure wireless Internet access for up to eight clients. The HotSpot feature supports the average day-to-day office activities (Internet browsing, emailing, file sharing, sending instant messages, etc.) for computers, smart phones, or tablets. If you enter or change the hotspot password, make sure you rename the hotspot also before activating. Sometimes Windows need a "repair" on the WiFi menu to get a correct IP address. If your carrier blocks your tether usage in WiFi mode, try to use USB mode instead in PdaNet+ and set Hide Tether Usage to Level I. When setting the range from the user interface, the computer running Connectify Hotspot defaults to an IP address ending in .1. Using the Connectify CLI you can set the full IP address for the hotspot with the "dhcp" option. So, for example, if you want your hotspot's IP address to be 10.2.2.7 you would run: > connectify_cli dhcp 10.2.2.7 If QYQPTN7.